by on December 21, 2017
Established in 1992, Zhejiang Taizhou Huangyan Hengxin Mould & Plastic Co., Ltd. is dedicated himself to the researching & producing of PET/PP/PC preform moulds, full-auto/semi-auto bottle blowing moulds, PE/PP cap mould and plastic injection moulds.
The application of Blow Mould in industrial environments has undergone revolutionary changes and is widely used to meet the needs of plastic products. The main advantages that this plastic manufacturing method offers you include rapid production at high volumes, enabling the company to produce large volumes of containers. Another advantage is that machines for this plastic production process have been developed to provide three-dimensional blow molding. It supports automated production of seamless parts with minimal flicker around the object. This improved machine can also provide high production speeds.
Blow mould also has some disadvantages, not advantages. Since the main material used is a polymer, it can have an environmental impact. There are a lot of plastic containers for liquids. Often, they've gone through a few different ways. This article gives you some information on the shortcomings of the blowing method.
This plastic production method requires a variety of production methods. These methods include extrusion blow molding and injection blow molding. Extrusion is essentially the same as blowing a compound to create a hollow glass glow. Injection is usually used to mass-produce containers. The difference between this method and extrusion is that it injects the molten polymer into the blow mold.
Another disadvantage of this plastic production method is environmental problems. Because the main material used is plastic, there is a great reliance on oil production. It is an integral part of polymer production. Therefore, production poses some risks, such as a reduction in oil resources. In addition, plastics are not biodegradable, so every plastic product we use is harmful to the planet. Moreover, this plastic manufacturing process will make the polymer used to make the product thinner. Due to the focus on creating a hollow form, there is no control over the thickness of the wall. With mass production, the stretched polymer gets thinner and thinner.
Posted in: Business
Be the first person to like this.
Page generated in 0.4186 seconds with 19 queries and GZIP enabled on